A down arrow

Konig Myth Wheels for BMW X4

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
BMW X4
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(16x7.5, 5x112, 43mm, Gloss Black)
Universal
(17x8, 5x112, 43mm, Gloss Black)
Universal
(18x8, 5x112, 43mm, Gloss Black with Blue Face)
Universal
(18x8, 5x112, 43mm, Gloss Black with Red Face)
Universal
(18x8, 5x112, 43mm, Gloss Black)
Universal
(18x8, 5x120, 35mm, Gloss Black)
Universal
(19x8.5, 5x112, 40mm, Gloss Black)
Universal
(19x8.5, 5x120, 40mm, Gloss Black)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 BMW X4 Fitment Help
Help narrow down what is shown.
Select your specific car using the Garage.
Jump to the Garage
For your BMW X4 the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Extra Wheel Size Range Bolt Pattern Wheel Offset Range
2015 to 2018 Front (19x8.5) to (21x9.5) 5x120 +26mm to +38mm
2015 to 2018 Rear (19x9.5) to (21x10) 5x120 +30mm to +48mm
2019 to 2024 Front (20x8) to (22x10.5) 5x112 +20mm to +28mm
2019 to 2024 Rear (20x9.5) to (22x11) 5x112 +25mm to +45mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The Konig Myth is a unique, 2 tone wheel designed to turn heads. Features a split spoke design, paired with a blue tinted face for a bold appearance. Using Flow Forming Technology, Konig was able to reduce the overall weight of each wheel, while increasing tensile strength vs. standard cast wheels.

Key Features:
  • Offered in 18 and 19 inch sizes.
  • Available in Gloss Black with Blue Face.
  • Uses Konig's Flow Forming Technology, which results in a stronger, lighter, and more durable wheel when compared to a traditional cast design.

Konig Myth Wheel Hardware Information:
  • Center Caps: Included
  • Lug Nuts: Accepts small diameter "tuner style" aftermarket lug nuts only (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

Our Customers Love Us - See our Reviews
...Loading Reviews