A down arrow

Konig Neoform Wheels for BMW Z4

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
BMW Z4
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(17x8, 5x112, 40mm, Matte Gray)
Universal
(18x8.5, 5x112, 32mm, Matte Gray)
Universal
(18x8.5, 5x112, 42mm, Matte Gray)
Universal
(18x8.5, 5x120, 32mm, Matte Gray)
Universal
(18x9.5, 5x120, 35mm, Matte Gray)
Universal
(19x8.5, 5x112, 32mm, Matte Gray)
Universal
(19x8.5, 5x112, 43mm, Matte Gray)
Universal
(19x9.5, 5x112, 40mm, Matte Gray)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 BMW Z4 Fitment Help
Help narrow down what is shown.
Select your specific car using the Garage.
Jump to the Garage
For your BMW Z4 the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Extra Wheel Size Range Bolt Pattern Wheel Offset Range
2003 to 2016 (16x7) to (19x9.5) 5x120 +22mm to +50mm
2018 to 2024 Front (18x9) to (20x10) 5x112 +20mm to +34mm
2018 to 2024 Rear (18x10) to (20x10.5) 5x112 +22mm to +42mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The Konig Neoform wheels are a classic 5 spoke design with some added benefits. The spokes have added detail for a unique style. The wheel was designed with caliper clearance in mind, while offering a slightly more concave shape for better fitment. The colors pair modern brilliance with a classic 2 tone feel. Using Flow Forming Technology, Konig was able to reduce the overall weight of each wheel, while increasing tensile strength vs. standard cast wheels.

Key Features:
  • Offered in a variety of sizes.
  • Available in a Matte Gray finish.
  • Uses Konig's Flow Forming Technology, which results in a stronger, lighter, and more durable wheel when compared to a traditional cast design.

Konig Neoform Wheel Hardware Information:
  • Center Caps: Included
  • Lug Nuts: Accepts small diameter "tuner style" aftermarket lug nuts only (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

Our Customers Love Us - See our Reviews
...Loading Reviews