Set Your Nissan Z Catalog
A down arrow

Konig Crown Wheels for Nissan Z

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
Nissan Z
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(16x7.5, 5x105 / 5x114.3, 40mm, Black Machined Face)
Universal
(17x7.5, 5x100 / 5x114.3, 45mm, Black Machined Face)
Universal
(17x7.5, 5x105 / 5x114.3, 40mm, Black Machined Face)
Universal
(18x8, 5x114.3, 40mm, Black Machined Face)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 Nissan Z Fitment Help
For your Nissan Z the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Extra Wheel Size Range Bolt Pattern Wheel Offset Range
2023 to 2024 Front (18x9) to (19x9.5) 5x114.3 +32mm to +42mm
2023 to 2024 Rear (18x9) to (19x10) 5x114.3 +15mm to +30mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The Konig Crown wheel brings elegance and versatility to your build. The unique 10 spoke design uses a machined front face finish that contrasts with the black. Using Flow Forming Technology, Konig was able to reduce the overall weight of each wheel, while increasing tensile strength vs. standard cast wheels.

Key Features:
  • Offered in 16, 17, and 18 inch sizes.
  • Available in Black Machined finish.
  • Uses Konig's Flow Forming Technology, which results in a stronger, lighter, and more durable wheel when compared to a traditional cast design.

Konig Crown Wheel Hardware Information:
  • Center Caps: Included
  • Lug Nuts: Accepts small diameter "tuner style" aftermarket lug nuts only (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

 Narrow Down Selections By Your Nissan Z's Year
Application
(Clicking a link will change you to the given Nissan Z's year catalog)
Konig Crown Wheels for 2024 Nissan Z
Konig Crown Wheels for 2023 Nissan Z

  Don't have a Nissan Z?

Our Customers Love Us - See our Reviews
...Loading Reviews