Set Your Subaru Forester Catalog
A down arrow

Konig Control Wheels for Subaru Forester

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
Subaru Forester
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(15x6.5, 5x100 / 5x114.3, 40mm, Matte Black)
Universal
(16x7, 5x100 / 5x114.3, 40mm, Matte Black)
Universal
(17x7, 5x100 / 5x114.3, 45mm, Matte Black)
Universal
(18x8, 5x100 / 5x114.3, 45mm, Matte Black)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 Subaru Forester Fitment Help
Help narrow down what is shown.
Select your specific car using the Garage.
Jump to the Garage
For your Subaru Forester the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Wheel Size Range Bolt Pattern Wheel Offset Range
2003 to 2008 (16x6.5) to (19x8.5) 5x100 +40mm to +55mm
2009 to 2013 (16x6.5) to (19x9) 5x100 +40mm to +55mm
2014 to 2018 (17x7) to (19x9) 5x100 +40mm to +55mm
2018 to 2024 (17x7) to (19x9) 5x100 +40mm to +55mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The Konig Control wheel is a lightweight 10 spoke design, with a classic twist. The 10 spoke design not only shaves weight, but also also provides advantages to cooling and a aggressive look. Using Flow Forming Technology, Konig was able to reduce the overall weight of each wheel, while increasing tensile strength vs. standard cast wheels.

Key Features:
  • Offered in 14, 15, 16, 17, and 18 inch sizes.
  • Available in Matte Black finishes.
  • Uses Konig's Flow Forming Technology, which results in a stronger, lighter, and more durable wheel when compared to a traditional cast design.

Konig Control Wheel Hardware Information:
  • Center Caps: Included
  • Lug Nuts: Accepts small diameter "tuner style" aftermarket lug nuts only (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

Our Customers Love Us - See our Reviews
...Loading Reviews