Each lift spring set is sold in front or rear pairs, or full sets of 4. Most spring sets are compatible with factory or OEM replacement shocks and struts. Certain lift spring sets require they be matched with Old Man Emu (OME) Nitrocharger+ shocks / struts. Please read all application notes for your vehicle specific information, and to ensure shock / strut compatibility.
When off-roading, you often need an increase in carrying ability to compensate for the added weight of accessories such as a steel bumper, or a winch, fuel, tires and/or a high lift jack. In addition, you want to make sure your Toyota 4Runner still sustains ample road clearance to better navigate difficult trails. With this in mind, the ARB Old Man Emu (OME) Lift Springs are designed to easily replace your factory springs, allowing you to carry heavier loads and providing an increase in road clearance (for most applications). One aspect ARB engineers specify is the spring free height, catering it to improving suspension articulation at a taller ride height and also alter the spring pre-load. By doing this as well as curating the spring material thickness or diameter, ARB is able to engineer springs that improve road clearance and increase load carrying ability.
Each spring set is rated for a particular load capacity, and are typically offered in one of three options. The Standard Load springs are recommended for stock vehicles or ones with a few added accessories in the weight range of 0 to 110 lbs. Medium Load springs sets are typically recommended for 110 to 220 lbs over factory, usually a vehicle with added weight such as a bull bar, steel bumper, or tailgate camper/roof tent. Heavy Load springs are catered to vehicles with a constant load of 220 lbs or more, often vehicles with a steel bumper and winch, or spare tire and fuel carriers. While the ARB OME Lift Springs may lift the vehicle a bit over factory ride height, their main objective is to increase load carrying ability and maintain a desired road clearance.
In all, the ARB OME Lift Spring Sets are a great upgrade for any Toyota 4Runner owner looking to increase the off-road ability of their Toyota 4Runner. Whether it's a simple project vehicle made to appear unaltered and near-factory, or a full on build featuring the best quality upgrades, these ARB OME Lift Springs will fit the bill.
Typical Load Capacity Ratings:
- Standard Load: 0-110 lbs: near factory weight, zero or minimal vehicle accessories.
- Medium Load: 110-220 lbs: off-road bumper or similar weighted upgrades.
- Heavy Load: 220 lbs+: steel off-road bumper with winch, spare-wheel, and/ or fuel carriers, etc.
Key Features:
- Application specific spring rate for increased load carrying ability.
- Application specific spring height, normally increasing road clearance.
- Typically compatible with factory, or OEM replacement, shocks and struts.
- Made of high-grade, micro-alloyed steel for strength and reliable performance.
- Heavy duty powder coating ensures long lasting protection and performance.
- Great upgrade for off-roaders, especially when paired with off-road shocks / struts.
- Ensures great ride quality both on and off road.
- Designed and manufactured in Australia.
- 3 year Limited Warranty.
