A down arrow

Konig Diverge Wheels for Toyota Sienna

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
Toyota Sienna
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(16x7.5, 5x114.3, 40mm, Gloss Black)
Universal
(17x8, 5x114.3, 42mm, Gloss Black)
Universal
(18x8, 5x114.3, 40mm, Gloss Black)
Universal
(19x8.5, 5x114.3, 32mm, Gloss Black)
Universal
(19x8.5, 5x114.3, 43mm, Gloss Black)
Universal
(20x8.5, 5x114.3, 32mm, Gloss Black)
Universal
(20x8.5, 5x114.3, 43mm, Gloss Black)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 Toyota Sienna Fitment Help
Help narrow down what is shown.
Select your specific car using the Garage.
Jump to the Garage
For your Toyota Sienna the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Wheel Size Range Bolt Pattern Wheel Offset Range
1998 to 2003 (15x6.5) to (17x8) 5x114.3 +30mm to +40mm
2004 to 2010 (16x6.5) to (18x8) 5x114.3 +35mm to +50mm
2011 to 2020 (17x6.5) to (20x8.5) 5x114.3 +30mm to +45mm
2021 to 2024 (17x7) to (21x9) 5x114.3 +30mm to +40mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The Konig Diverge wheels offer unique styling with elegance. The split 5 spoke design provides a classic design with a modern twist. Using Flow Forming Technology, Konig was able to reduce the overall weight of each wheel, while increasing tensile strength vs. standard cast wheels.

Key Features:
  • Offered in a variety of sizes.
  • Available in a Gloss Black finish.
  • Uses Konig's Flow Forming Technology, which results in a stronger, lighter, and more durable wheel when compared to a traditional cast design.

Konig Diverge Wheel Hardware Information:
  • Center Caps: Included
  • Lug Nuts: Accepts small diameter "tuner style" aftermarket lug nuts only (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

Our Customers Love Us - See our Reviews
...Loading Reviews