A down arrow

Konig Hypertrail HT2 Wheels for Toyota Tundra

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
Toyota Tundra
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(17x8.5, 6x139.7, 6mm, Gloss Anthracite)
Universal
(17x8.5, 6x139.7, 6mm, Matte Black)
Universal
(17x8.5, 6x139.7, 6mm, Satin Bronze)
Universal
(18x9, 6x139.7, 0mm, Gloss Anthracite)
Universal
(18x9, 6x139.7, 0mm, Matte Black)
Universal
(18x9, 6x139.7, 0mm, Satin Bronze)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 Toyota Tundra Fitment Help
Help narrow down what is shown.
Select your specific car using the Garage.
Jump to the Garage
For your Toyota Tundra the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Wheel Size Range Bolt Pattern Wheel Offset Range
2000 to 2006 (16x7) to (22x9) 6x139.7 +-25mm to +15mm
2007 to 2021 (18x8) to (22x12) 5x150 +-45mm to +60mm
2022 to 2024 (18x8) to (24x10) 5x150 +-45mm to +60mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The Konig Hypertrail HT2 is a split spoke wheel designed to add a classic appearance, while maintaining the offroad capabilities of the Hypertrail series. Designed with trucks and SUV's in mind, the Hypertrail series can handle plenty of additional weight, and features a thick rear flange and knurled seats to keep your tires secure in even the toughest conditions. Using Flow Forming Technology, Konig was able to reduce the overall weight of each wheel, while increasing tensile strength vs. standard cast wheels.

Key Features:
  • Offered in 17 and 18 inch sizes.
  • Available in Matte Black, Satin Bronze, and Gloss Anthracite finishes.
  • Uses Konig's Flow Forming Technology, which results in a stronger, lighter, and more durable wheel when compared to a traditional cast design.

Konig Hypertrail HT2 Wheel Hardware Information:
  • Center Caps: Included
  • Lug Nuts: Accepts small diameter "tuner style" aftermarket lug nuts only (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

Our Customers Love Us - See our Reviews
...Loading Reviews