Set Your Acura TL Catalog
A down arrow

Konig Crown Wheels for Acura TL

General Representation
General Image (Actual Part May Vary)
Select an Application For Your
Acura TL
 
Year Range
Door Config  [Trim Level]
Application / Notes
Universal
(16x7.5, 5x105 / 5x114.3, 40mm, Black Machined Face)
Universal
(17x7.5, 5x100 / 5x114.3, 45mm, Black Machined Face)
Universal
(17x7.5, 5x105 / 5x114.3, 40mm, Black Machined Face)
Universal
(17x7.5, 5x112 / 5x120, 35mm, Black Machined Face)
Universal
(18x8, 5x114.3, 40mm, Black Machined Face)
 
 
 
1-4 DAY FAST FREE SHIPPING!
(free to mainland U.S. only)
🔰 Acura TL Fitment Help
Help narrow down what is shown.
Select your specific car using the Garage.
Jump to the Garage
For your Acura TL the required bolt pattern and approximate general recommended wheel size range and offset range are the following:
Year Range Extra Wheel Size Range Bolt Pattern Wheel Offset Range
1995 to 1998 2.5 / Standard (15x6) to (18x7.5) 4x114.3 +38mm to +48mm
1996 to 2003 3.2 / Type S (15x6) to (19x8) 5x114.3 +38mm to +48mm
2004 to 2008 (17x7) to (19x8.5) 5x114.3 +35mm to +45mm
2009 to 2014 Standard (17x8) to (20x9) 5x120 +45mm to +60mm
2009 to 2014 SH (18x8) to (20x9.5) 5x120 +45mm to +60mm

SOLD INDIVIDUALLY. Put in a quantity of 4 for a complete set. For help selecting the right wheels, check out our Wheels & Tires Buyer's Guide.

The Konig Crown wheel brings elegance and versatility to your build. The unique 10 spoke design uses a machined front face finish that contrasts with the black. Using Flow Forming Technology, Konig was able to reduce the overall weight of each wheel, while increasing tensile strength vs. standard cast wheels.

Key Features:
  • Offered in 16, 17, and 18 inch sizes.
  • Available in Black Machined finish.
  • Uses Konig's Flow Forming Technology, which results in a stronger, lighter, and more durable wheel when compared to a traditional cast design.

Konig Crown Wheel Hardware Information:
  • Center Caps: Included
  • Lug Nuts: Accepts small diameter "tuner style" aftermarket lug nuts only (sold separately).
  • TPMS: Direct fit compatibility with most all factory TPMS (Tire Pressure Monitoring System) sensors.
  • Hubcentric Rings: Not necessary if installed properly. The tapered aftermarket lug nuts this wheel accepts will automatically center the wheel if installed correctly (tighten each lug nut using a criss-cross pattern, usually to 80 lb-ft of torque each, and re-tighten each lug nut after about 100 miles of driving).

Our Customers Love Us - See our Reviews
...Loading Reviews